Intersections are formed where two or more roadways intersect. As this brings conflicting streams of traffic together, drivers using an intersection must rely on right-of-way laws to determine who goes first. Depending on the type of intersection you are dealing with, there may also be traffic control devices such as road signs or traffic lights present to keep traffic moving in a safe and coordinated fashion.
- Preparing to use an intersection
- Uncontrolled intersection right-of-way
- First in, first out
- Yield to the right
- Right-of-way when turning left
- Right-of-way on single- or two-lane roads
- Right-of-way on T-intersections
- Right-of-way on unpaved roads
- Right-of-way on driveways and private roads
- Controlled intersection right-of-way
- Intersections with a stop sign
- Four-way stop right-of-way
- Right-of-way at yield signs
- Right-of-way at traffic lights
- Red traffic lights
- Yellow traffic lights
- Right-of-way when traffic lights fail
Even on fully-controlled intersections that utilize these devices, right-of-way traffic laws will play a part in maintaining order. Nowhere are drivers more at risk, than when merging into a gap in traffic or crossing a conflicting stream of traffic. Both these maneuvers frequently occur at intersections. To choose a safe path through an intersection, motorists must understand right-of-way rules and learn to accurately judge the speed and location of other vehicles.
Preparing to use an intersection
Motorists preparing to drive through an intersection must consider various factors when determining who has right-of-way. Begin by establishing which lane you need to be in for your desired course of travel and merge into that lane as soon as possible. Then, scan the roadway around the intersection to answer the following questions:
1
Are there traffic control devices at the intersection? If so, these will determine the order in which different streams of traffic may enter the intersection.
2
Are there any dedicated lanes? If you wish to turn, merging into a protected turn lane will minimize the potential for right-of-way conflicts.
3
Can you see all entrances and roads feeding into the intersection clearly? You may mistakenly think you are clear to move through the intersection if conflicting traffic is obscured by an obstacle.
4
How busy is the roadway? Vehicles to your front present the biggest hazard when approaching an intersection. Maintain a safe following distance in case vehicles ahead of you must slow down or stop at the intersection.
Uncontrolled intersection right-of-way
When there are no traffic lights or road signs controlling an intersection, drivers have only their knowledge of right-of-way rules to guide them. The following sections will talk you through the main rules to remember when establishing right-of-way without support from traffic control devices.
Remember, nobody lawfully has right-of-way unless another driver has yielded the right-of-way to them. Claiming the right-of-way by force because you believe the other driver should yield is not lawful and stands against the reason we have right-of-way rules: to facilitate the safe and orderly movement of traffic. If another driver takes right-of-way at an intersection – let them have it.
First in, first out
In most cases, vehicles will arrive at an intersection at different times. It is easy to establish who must yield in these circumstances, as the “first in, first out” rule applies. The driver who reaches the intersection first goes first; the second driver must yield until the first driver has completely cleared the intersection.
Yield to the right
This second essential right-of-way rule dictates who must yield when two or more vehicles arrive at an intersection in unison. When two cars arrive at the same time, motorists must yield the right-of-way to the vehicle to their right. If vehicles arrive at every entrance to the intersection simultaneously, eye-contact can be used to establish who will go first. If necessary, you can wave another driver through the intersection ahead of you.
“Yield to the right” does not mean you can automatically drive through the intersection if the roadway to your right is clear. Remember to watch out for vehicles approaching from the left and make sure they are going to yield before you proceed.
Right-of-way when turning left
If two vehicles approach an intersection from opposite directions and one wishes to drive straight through while the other wishes to turn left, the left-turning driver must yield. Ordinarily, opposing traffic could move through an intersection at the same time, providing there is no cross traffic. However, in this situation the left-turning driver’s path would cut directly across the opposing driver’s path. Any motorist seeking to turn left at an intersection, or into an alley, driveway or private road, must yield to oncoming traffic.
In general, traffic turning at an intersection should yield to traffic moving directly through the intersection. Of course, this does not necessarily apply when traffic control devices are present.
Right-of-way on single- or two-lane roads
If you are traveling on a single-lane or two-lane roadway that meets a wider road of three lanes or more, you must yield to all traffic on the broader roadway before proceeding. This is because the broader road is likely to be busier and more hazardous, making it harder for motorists on that road to yield right-of-way.
Right-of-way on T-intersections
For similar reasons, traffic approaching a through road from an ending road at a T-intersection must also yield. Often, the through road which forms the top of the “T” is a faster and more heavily traveled road. Even if this is not the case, it would be illogical and difficult for traffic on the through road to yield to adjoining traffic.
Right-of-way on unpaved roads
Where paved roadways intersect with unpaved roadways, motorists approaching the intersection from the unpaved road must yield to vehicles on the paved road.
Right-of-way on driveways and private roads
If seeking to enter the main road from a driveway, alley or private road, a motorist must yield to all traffic already on the main road and any pedestrian traffic wishing to cross the driveway’s entrance. When obstacles obstruct your view of the sidewalk in either direction, you should come to a full stop prior to the sidewalk to check for pedestrians before proceeding.
Motorists parked by the roadside who wish to re-enter traffic on the roadway must also yield to vehicles already using the roadway. If you intend to turn into a driveway or alley situated immediately after an intersection, do not begin to signal your turn until you have entered the intersection. Otherwise, you may confuse other road users.
Controlled intersection right-of-way
Right-of-way at controlled intersections is at least partially dictated by traffic control devices, such as road signs or traffic signals. It is important to remember that traffic control devices rarely resolve all potential conflicts, so right-of-way rules must still be factored in. For instance, a green traffic light may permit you to turn left at an intersection but unless that turn is protected, you will still need to yield to oncoming traffic.
The assistance provided by traffic control devices means that controlled intersections are generally safer than uncontrolled intersections. However, this is only the case if drivers remain vigilant. You must always check that the intersection is clear and that no other vehicles will interfere with your path of travel before proceeding, even if a road sign or traffic light indicates that you may go.
Some intersections are semi-controlled, in that stop signs are installed on certain roadways yet not on others. Exercise caution when entering an intersection from an uncontrolled entrance, as other vehicles may not yield the right-of-way as they should.
Intersections with a stop sign
Every motorist approaching an intersection entrance controlled by a “STOP” sign must come to a full stop and yield the right-of-way before proceeding. Keep in mind that traffic cops will cite you if they witness you performing a “rolling stop” at a stop sign-controlled intersection. “Full stop” means exactly that.
Many drivers do not realize that they must stop before entering a stop sign-controlled intersection, even when they have already stopped behind other motorists waiting to enter the intersection. When all vehicles ahead of you have passed through the intersection, you must still stop completely at the designated stop line or prior to the pedestrian crosswalk and yield to all conflicting traffic and pedestrians.
Four-way stop right-of-way
Intersections marked with a four-way stop sign should be treated like uncontrolled intersections. Motorists approaching the intersection at the same time must come to a complete stop and yield to the vehicles on their right before proceeding. Otherwise, the “first in, first out” rule applies.
Right-of-way at yield signs
Any motorist approaching a “YIELD” sign at an intersection entrance must yield the right-of-way, though is not required to come to a complete stop unless safety demands it. You may be cited for not stopping at an intersection – even when no “STOP” signs are present – if a traffic officer believes you should have stopped in the interest of safety. At yield sign-controlled intersections, drivers should stop to yield the right-of-way if another vehicle is occupying the intersection or is close enough to the intersection to pose a hazard.
Right-of-way at traffic lights
When traffic lights are used to control an intersection, it is usually resoundingly obvious who must yield the right-of-way. When facing a green light, drivers may proceed with caution but yield to opposing traffic when turning left (unless the turn is protected by a green arrow signal). Yellow lights tell drivers to stop if it is safe to do so, while red lights always mean stop. However, the way in which vehicles may proceed having stopped at a red light is determined by several other factors.
Red traffic lights
All student drivers must refer to their state’s driving manual for details concerning right-of-way rules at red traffic lights in their area. Though, the rules listed below apply in most cases:
- A solid red light indicates that traffic must wait until the light changes to green before entering the intersection.
- A flashing red light indicates that traffic may proceed one car at a time, as would be the case when facing a stop sign.
Most states permit turning right under a red traffic light, unless there is a “NO RIGHT TURN ON RED” sign posted at the intersection. Check out your driving handbook for details. Where right turns on red are allowed, drivers must still come to a complete stop and yield to all cross traffic and pedestrians before starting the turn. When turning left from a one-way street onto another one-way street, drivers are usually permitted to turn under a red traffic light.
Yellow traffic lights
Flashing yellow traffic lights are relatively rare and can sometimes confuse drivers. If you encounter this signal at an intersection, you must treat it the same way as a “YIELD” sign. This means yielding to all cross traffic and pedestrians, stopping if necessary and moving through the intersection with caution.
Right-of-way when traffic lights fail
What happens if you approach an intersection which is usually controlled by traffic lights, but the signals are inoperative? Such situations would be chaotic, if it weren’t for right-of-way rules. When traffic lights fail, any lane of traffic faced with an inoperative signal must treat that signal like a “STOP” sign. If every lane is facing an inoperative light, the intersection must be treated as a four-way stop intersection with each motorist stopping completely and yielding to their right.
Would you pass a driving test today?
Find out with our free quiz!
TAKE A FREE TEST
Like the article? Give us 5 points!
Click a star to add your vote
4.5 out of 5stars based on16votes.